Our Most Popular Model!

The SU7 can rotate 360 degrees so you can move it as the sun moves or just to cover different areas. It has a patented one movement action and a gas strut making it extremely easy to open and close. The SU7 comes in three sizes:

  • 2.5m square
  • 3.0m square
  • 3.5m diameter octagon.
  • It is manufactured from powder coated marine grade alloy, stainless steel and all materials are non-corrosive. The frame carries a 3 year warranty.
SU7 portable umbrella on base

SU7 portable umbrella on base

This umbrella has been wind tunnel tested and certified up to 40 km/h. It comes in a wide range of colours and can be fitted with a LED light. It carries a 5 year warranty on the fabric and is made from premium 100% solution dyed Dickson Acrylic and has a shade rating of UPF 50+. A protective cover is included as standard to keep your umbrella looking great for years to come.

The SU7 is a very popular outdoor umbrella and by far our most popular model.

Our Umbrella Range

Wall Mounted Umbrellas

Wall Mounted Umbrellas

Outdoor Cantilever Umbrella

Outdoor Cantilever Umbrella

Multi Mast SU6

Multi Mast SU6


Rotating Cantilever

High Wind Performance

High Wind

Commercial Shade Umbrellas

Commercial Shade Umbrella

Installation guides are provided with all umbrellas if you choose to have it installed yourself or we can install it for you.

These umbrellas need to be securely fastened in one of the following ways:

  1. Bolted to a concrete slab that is at least 100mm thick. Any bolts or screws have to be at least 150mm away from the closest edge of the concrete.
  2. Bolted to a timber deck. Access needs to be gained under the deck to secure extra timbers for added strength before bolting the base to the deck.
  3. Into the ground. A footing must be dug approximately 500mm x500mm & 700mm deep with a flare at the bottom. A separate in ground spigot is then concreted in & left to cure. The umbrella is then attached to the spigot.