Multi Mast Cantilever Umbrellas (SU6)

This unique umbrella has a reinforced powder coated mast that carries a 3 year warranty and enables 1, 2, 3 or 4 umbrellas to be mounted on the one mast. Each of which can be 2.5m square, 3m square or 3.5m diameter octagon. They can be mounted together or added at a later date.

They have a patented one movement action and a gas strut making them extremely easy to open and close. The umbrellas have been wind tunnel tested and certified to 40 km/h.  Rain gutters can be added between the umbrellas and zipped into place. They come in a wide range of colours and can be fitted with LED lights.

The umbrella fabric carries a 5 year warranty and is made from premium 100% solution-dyed Dickson Acrylic and has a shade rating of UPF 50+. A protective cover is included as standard to keep your umbrella looking great for years to come. In the larger configuration this umbrella provides 37.8 square meters of shade!

Our Umbrella Range

Wall Mounted Umbrellas

Wall Mounted Umbrellas

Outdoor Cantilever Umbrella

Outdoor Cantilever Umbrella

Multi Mast SU6

Multi Mast SU6


Rotating Cantilever

High Wind Performance

High Wind

Commercial Shade Umbrellas

Commercial Shade Umbrella


Installation guides are provided with all umbrellas if you choose to have it installed yourself or we can install it for you.

These umbrellas need to be securely fastened in one of the following ways:

  1. Bolted to a concrete slab that is at least 100mm thick. Any bolts or screws have to be at least 150mm away from the closest edge of the concrete.
  2. Bolted to a timber deck. Access needs to be gained under the deck to secure extra timbers for added strength before bolting the base to the deck.
  3. Into the ground. A footing must be dug approximately 500mm x 500mm & 700mm deep with a flare at the bottom. A separate in ground spigot is then concreted in & left to cure. The umbrella is then attached to the spigot.