High Wind Performance Umbrella (SU8)

If high wind performance is what you need then the SU8 is the umbrella for you! Wind tunnel tested up to 90 km/h, the SU8 is manufactured using anodised aluminium and solid core fibreglass ribs to accommodate high winds. It rotates 360 degrees and also tilts to any position making it excellent at blocking that afternoon sun. It comes in one standard size of 2.5m square and comes with a 3 year warranty on both the frame and the canopy fabric. The mast can be mounted either vertically or in a forward leaning position. The fabric is made from 100 percent solution-dyed premium Sunbrella Acrylic fabric.

Our Umbrella Range

Wall Mounted Umbrellas

Wall Mounted Umbrellas

Outdoor Cantilever Umbrella

Outdoor Cantilever Umbrella

Multi Mast SU6

Multi Mast SU6

Rotating

Rotating Cantilever

High Wind Performance

High Wind

Commercial Shade Umbrellas

Commercial Shade Umbrella

Installation guides are provided with all umbrellas if you choose to have it installed yourself or we can install it for you.

These umbrellas need to be securely fastened in one of the following ways:

  1. Bolted to a concrete slab that is at least 100mm thick. Any bolts or screws have to be at least 150mm away from the closest edge of the concrete.
  2. Bolted to a timber deck. Access needs to be gained under the deck to secure extra timbers for added strength before bolting the base to the deck.
  3. Into the ground. A footing must be dug approximately 500mm x 500mm & 700mm deep with a flare at the bottom. A separate in ground spigot is then concreted in & left to cure. The umbrella is then attached to the spigot.